Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Running Springs, CA
Chimney repair in Running Springs usually comes down to one of five jobs: cap installation, cap replacement, liner installation, flashing repair, or crown repair. Most homes here are 1950s to 1980s A-frames and chalets with external masonry chimneys that take a beating from snow, ice, and pine-fueled fires. Chimney Sweep Hesperia has served Running Springs since 2014, and we carry the contractor-grade materials these mountain chimneys actually need. Call (855) 382-8016 when you’re ready for an honest assessment.
Why Running Springs Homes Are Different
Running Springs sits above 6,000 feet in the San Bernardino Mountains, and that elevation changes how chimneys behave. Snow loads freeze and thaw against external masonry, spalling brick and cracking crowns. The cold means long wood-burning seasons, which means heavy creosote accumulation, especially when homeowners burn pine cut from the surrounding San Bernardino National Forest. Pine creates fast, dense creosote that glazes flue tiles quickly.
The housing stock here compounds the problem. Much of Running Springs is older mountain cabins and A-frame or chalet-style homes built between the 1950s and 1980s. Many have exterior masonry chimneys with original clay flue tiles, and decades of thermal cycling have left those tiles cracked. A significant number of these homes are second properties. Flues sit unused for months, then get pressed into service in October when owners return and light the first fire. That first burn is often the most dangerous, because creosote built up during previous seasons has had months to harden into a glaze.
The summer wildfire season adds another layer. Local and county fire rules treat spark arrestors and clean flues as fire-safety obligations, not optional maintenance. Homes off Highway 330 and Highway 18 sit close to forested terrain, and a chimney emitting sparks in September is a serious liability. We schedule around seasonal occupancy. Many Running Springs homeowners book sweeps and repairs in late summer or early fall, before the first snow makes roof access difficult.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Running Springs Services
Running Springs homeowners call us most often for two things: cleaning the chimney before the burning season, and clearing dryer vents that have become fire risks. Both are covered in detail on their own pages.
Chimney Sweep in Running Springs
A chimney sweep in Running Springs means more than running a brush through the flue. We inspect the entire system while we clean, looking for cracked tiles, deteriorating mortar, and creosote glaze that a basic sweep won’t remove. Mountain homes with pine-fueled fires often need aggressive mechanical cleaning, not just a standard wire brush. If you have a second home here and haven’t had the chimney swept in multiple seasons, the buildup can be significant. We’ll document what we find, show you the condition, and clean it properly. Full details on our Chimney Sweep in Running Springs page.
Dryer Vent Cleaning in Running Springs
Dryer vent cleaning in Running Springs addresses a fire risk most chimney-only companies ignore. Mountain homes often have longer vent runs than valley houses, sometimes routed through tight crawl spaces or up through roofs. Lint accumulates at bends and at the termination point, and that lint is highly flammable. The U.S. Fire Administration consistently lists dryer vent fires among the leading causes of residential structure fires. We clean the full run, verify airflow, and check for blockages caused by birds or debris. See Dryer Vent Cleaning in Running Springs for specifics.
Chimney Repair in Running Springs
Chimney repair in Running Springs is mostly about water damage and creosote damage. External masonry chimneys here absorb snowmelt and rain, freeze and thaw through the winter, and crack. Cracked flue tiles allow heat and gases to reach combustible framing, and a damaged crown lets water into the chimney structure itself. Our repair team works with DuraFlex, HeatShield, and Copperfield materials to fix these problems properly rather than patching them. We don’t just find the problem, we fix it. That’s the core of our Chimney Repair service.
Chimney Cap Installation
Signs you need it
You don’t have a cap, or the existing cap is missing sections, letting rain, snow, birds, and debris directly into the flue.
What it costs in Running Springs
Chimney cap installation in Running Springs typically runs $200 to $700 depending on the flue size and whether a custom stainless or copper cap is required.
How we do it
We measure the flue opening, confirm clearances, and install a properly sized cap with an integrated spark arrestor, which is a fire-safety requirement in this mountain region.
Chimney Liner Installation
Signs you need it
Your inspection shows cracked or missing flue tiles, or you’re seeing pieces of tile in the firebox, which means the liner can no longer safely contain combustion gases.
What it costs in Running Springs
Chimney liner installation in Running Springs typically costs $2,500 to $6,500, with the final number driven by flue height, diameter, and whether the run is straight or offset.
How we do it
We remove or prepare the existing flue, drop a DuraFlex flexible liner sized to the appliance, insulate it, and reconnect the appliance with a proper top plate and cap.
Chimney Flashing Repair
Signs you need it
You see water staining on ceilings near the chimney, damp spots on the chimney chase, or rusted, lifted flashing where the chimney meets the roof deck.
What it costs in Running Springs
Chimney flashing repair in Running Springs generally runs $350 to $1,000, but costs climb if the existing flashing has to be removed and the roof underlayment replaced.
How we do it
We remove the old flashing, inspect the roofline for damage, and install new step and counter flashing sealed with a high-grade elastomeric sealant rated for mountain freeze-thaw cycles.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, spalling, or missing chunks, allowing water to soak the masonry and freeze apart from the inside.
What it costs in Running Springs
Chimney crown repair in Running Springs typically falls between $500 and $1,500, depending on whether we can resurface the existing crown or need to pour a new one.
How we do it
We clean the crown surface, repair or repour with a properly sloped concrete mix that sheds water, and apply a waterproof membrane so snowmelt can’t penetrate the masonry.
What Chimney Repair Costs in Running Springs
| Item | Typical range in Running Springs |
|---|---|
| Chimney cap installation | $200 – $700 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $350 – $1,000 |
| Chimney crown repair | $500 – $1,500 |
Does a cracked flue tile really need to be fixed?
Yes. A cracked flue tile lets heat and combustion gases reach the chimney’s combustible framing. In a wood-heavy mountain area like Running Springs, that’s a chimney fire or a carbon monoxide risk waiting to happen. Call (855) 382-8016 for an exact quote, estimates are free.
Can you repair just the crown, or do I need a full rebuild?
In most Running Springs homes we can repair or resurface the crown without rebuilding the chimney. We’ll only recommend replacement if the masonry below is also compromised. The estimate is free, and the repair is usually done in a single visit. Call (855) 382-8016.
Brands We Service in Running Springs
We install and service Copperfield caps, DuraFlex liners, and HeatShield ceramic flue sealant in Running Springs. We stock common cap sizes and liner components locally in our Hesperia shop, which means most Running Springs jobs don’t wait on parts. See our brands for the full list of what we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Running Springs, CA
| Service | Typical range in Running Springs |
|---|---|
| Chimney cap installation | $200 – $700 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $350 – $1,000 |
| Chimney crown repair | $500 – $1,500 |
| Chimney sweep | $189 – $350 |
| Dryer vent cleaning | $89 – $185 |
| Chimney inspection | $149 – $300 |
| Creosote glaze removal | $250 – $600 |
Running Springs pricing pushes upward when roofs are steep, when snow or ice makes access hard, or when a chimney hasn’t been serviced in many seasons and needs aggressive creosote removal before any repair work can start. We quote a flat price before any work begins, and we don’t add fees because a job took longer than expected.
Neighborhoods We Serve in Running Springs
We cover all of Running Springs, 92382, from the neighborhoods along Highway 18 down to the roads off Highway 330. Mountain drive times are what they are, but we schedule Running Springs jobs in clusters so we’re usually in the area within a few days of your call.
- Upper Rowco
- Lower Rowco
- Arrowbear Lake
- Snow Valley area
- Valley View
Service Area – Cities Near Running Springs
Chimney Sweep Hesperia serves Running Springs and the surrounding mountain and high-desert communities. We work in Lake Arrowhead, CA, Crestline, CA, and down the hill in Muscoy, CA and Hesperia, CA. If you’re in one of these towns and need a sweep or repair, the same crew and the same flat-pricing policy apply.
Serving Running Springs, CA – Our Local Coverage Area
We’re based in the Running Springs area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Running Springs
We schedule Running Springs jobs most weeks, and we try to cluster appointments so we’re not driving the hill for one visit. Most homeowners get a slot within three to five business days, and we’ll work around seasonal occupancy if you’re only up on weekends. Call (855) 382-8016 to check the next available date.
Most minor repairs, cap installation, and sweeping don’t require a permit in Running Springs. Liner replacement and structural work may need sign-off depending on the scope, and we’ll tell you upfront if that’s the case. We handle the parts we’re licensed for and point you straight on anything that needs county review.
Yes, and that’s a big part of our Running Springs work. We’re used to coordinating with owners who aren’t on the mountain full-time. We’ll schedule around your availability, and we can do the inspection, cleaning, and any needed repair in one visit so you don’t have to make multiple trips.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Running Springs Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Alejandro Garcia"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Tracy Vaughn"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Claudia Salazar